BRANDRIGOLNA
MODEL

 

Triple Output, 195 Watt Power Supply

The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time in a powerful new package. The DP800 Series is a family of linear power supplies systems with 1, 2, or 3 outputs and up to 200 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications. Built in V, A, and W measurements make power monitoring easy, but additional wave tracking, timing, and analysis features in the advanced ?A? series supplies means there are even more ways to use the instruments. New digital triggering between instruments also makes it possible to reliably combine and connect supplies together. Intuitive to use for everything from education labs to the R & D bench, the DP800 family of power supplies provide incredible value for any application. Select the value models for best price performance or upgrade to the ?A? model to improve resolution and add advanced monitoring, triggering, and programming capabilities.
  • Features:
  • 3 Outputs; total power up to 195W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Channel isolation: CH1 || CH2,CH3
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Support for output Delay, Analysis, Monitor, and Preset functions
  • 5 inch TFT Display
  • Connectivity including USB Host & Device, LAN, and Digital IO
Model DP832A
Channels 3
DC Output (0°C to 40°C )
Voltage/current CH1: 0 to 30V/0 to 3A CH2: 0 to 30V/0 to 3A CH3: 0 to 5V/0 to 3A
OVP/OCP CH1: 1mV to 33V/1mA to 3.3A CH2: 1mV to 33V/1mA to 3.3A CH3: 1mV to 5.5V/1mA to 3.3A
Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current <1.5μArms
Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage 0.05% + 10mV
Current 0.2% + 10mA
Readback Voltage 0.05% + 5mV
Current 0.15%+ 5mA
Resolution
Programming Voltage 1mV
Current 1mA
Readback Voltage 0.1mV
Current 0.1mA
Display Voltage 1mV
Current 1mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per? (Output Percentage + Offset)
Voltage CH1/CH2: 0.01%+5mV CH3: 0.01%+2mV
Current 0.01%+2mA
Stability [3] ±(Output Percentage + Offset)
Voltage CH1/CH2: 0.02%+2mV CH3: 0.01%+1mV
Current 0.05%+2mA
Please fill out the following request form. We will contact you as soon as possible.
Your name
Your Email
Your phone
Your message
Updating

DETECH SYSTEM PTE LTD

Address: 1 Yishun Industrial St. #07-23. APosh Bizhub,
Singapore 768160